KEM
Technical Support:
9
1.4
DATA INICIALIZATION AFTER A DOWNLOAD
It is important to keep in mind that, when reprogramming the device from ETS (either
partial or complete downloads), the consumption variables and therefore any data
accumulated so far are cleared on both partial and total registers.
If it is required to maintain the present consumption values, before carrying out the
download, the option
“maintain the current values” must be activated in ETS in the
desired registers, or an initial value must be parameterised (see sections 2.2.2, 2.3.2
and 2.4.2 for more details).
There are also certain objects with the flag W enabled, so they can be initialized directly
writing the desired value in the communication object.
It is important to note that global objects are always the sum of channels or phases, so
it is not possible to set a value after download for these nor have flag W enabled.