Zennio KEM, User Manual, Page: 34 / 49

KEM
http://www.zennio.com Technical Support: http://support.zennio.com
34
ETS PARAMETERISATION
The configuration parameters for notifications are the following:
Figure 25. Notifications - Notification n
Notification Description : the name set in this text box will be the ETS tab
name.
Variable [ Water Consumption / Electric Consumption ]: sets the magnitude to
be monitored.
Next parameters depend on the variable selected and the number of partial registers
enabled:
Channel [ Global / Channel or Phase 1
/ … / Channel or Phase 4
]: sets the
channel or phase to be monitored.
Register [ Total Register / Partial Register 1 / Partial Register 2 ]: sets the
register containing the variable monitored. Only currently enabled registers will
be displayed.
Note: partial registers are only available if have been enabled previously in the
selected variable.
Limit [ 1
…2147483647
]: sets the trigger value for the notification. The
measurement units will match the ones than have been configured for the
selected variable.
Action [ Send 0 / Send 1 ]: set the value to be sent through the binary object
“
Notification n: __________
” when the notification is triggered.