Zennio KEM, User Manual, Page: 38 / 49

KEM
http://www.zennio.com Technical Support: http://support.zennio.com
38
2.7 INPUTS
KEM incorporates five analogue/digital inputs , each configurable as a:
Binary Input , for the connection of a pushbutton or a switch/sensor.
Temperature Probe , to connect a temperature from Zennio.
Motion Detector , to connect a motion detector from Zennio.
2.7.1 BINARY INPUT
Please refer
to the specific user manual “
Binary Inputs
”, available in the KEM product
section, at the Zennio website ( www.zennio.com ).
2.7.2 TEMPERATURE PROBE
KEM allows to select four probe types:
Zennio Temperature Probe.
Custom NTC Temperature Probe.
Zennio Water Probe .
Custom NTC Water Probe
These last two probes will be used for the calculation of the calorific energy of the climate
system and have the same functionality as the temperature probes mentioned in the
manual.
Please r
efer to the specific user manual “
Temperature Probe
”, available in the KEM
product section, at the Zennio website ( www.zennio.com ).
2.7.3 MOTION DETECTOR
It is possible to connect motion detectors from Zennio to the input ports of KEM. This
brings the device with the possibility of monitoring motion and presence in the room.
Depending on the detection, different response actions can be parameterised.