KEM
Technical Support:
33
2.5
NOTIFICATIONS
Notifications in KEM consist in sending a binary object to the KNX bus when the selected
variables, stored in either total or partial registers, reach a pre-set value.
The variables on which it is possible to configure notifications are
water consumption
and
electricity consumption
for global and individual magnitudes.
ETS PARAMETERISATION
The Notifications tab will become visible once the Notification function has been enabled
in the General screen (see section 2.1).
Figure 24.
Notifications - Configuration
Individual Notification tabs and the binary objects “
Notification n: __________
” will
become visible once any of the 10 notifications has been enabled.
2.5.1
NOTIFICATION N
When enabling a notification, this tab appears, where the magnitude of the notification
and the limit from which it is sent can be configured.