KEM
Technical Support:
11
2
CONFIGURATION
2.1
GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
Parameters tab of the device.
2.1.1
CONFIGURATION
Main tab where the main functions of the device are enabled.
ETS PARAMETERISATION
The configurable parameters on the “General” screen are the followings:
Figure 2.
General
Initial State Sending Delay
[
5
…255
] [
x1 s
]
1
: time that elapses between the
start-up of the device and the beginning of sending objects through the bus.
Periodic Date and Time Request
[
enabled
/ disabled
]: if this parameter is
enabled, will be sent a periodic request for date and time every 15 minutes.
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[
default
/rest of options
].