Zelmer ZVC542 Series, User Manual

Page: 23 / 27

23
15 Outlet filter. The vacuum cleaner is fitted with only one
outlet filter (A or B)
A HEPA H11 outlet filter (ZVC542ST, ZVC542STUA)
(installed in the vacuum cleaner)
B HEPA H13 outlet filter (ZVC542HT, ZVC542HTUA)
(installed in the vacuum cleaner)
16 Inlet filter casing (installed in the vacuum cleaner)
17 Inlet filter (installed in the vacuum cleaner)
18 Parquet brush “BNB” (Brush Natural Bristle) (ZVC542HT,
ZVC542HTUA)
Is used to clean and polish hard, scratch sensitive surfaces
such as wooden floors, floor panels, parquet, marble, tiles, etc.
Delicate and soft natural bristles ensure maximum vacuum
effectiveness and protects against scratching the cleaned
surface.
19 Small nozzle
20 Small brush
21 Crevice nozzle
22 Switchable combination brush
23
Turbobrush
24 Accessory holder
25 Holder screws
Preparing the vacuum cleaner
for operation
1 Insert the curved hose end in the opening of the vacuum
cleaner and gently press. A characteristic click indicates that
the hose has been properly installed.
2 Connect the other end of the hose (handle) with the
telescopic suction tube. In order to do so press the locking
device “A” and slide the tube into the hose handle so that
the locking device “A” is blocked in opening “B” .
3 Adjust the length of the telescopic suction tube by sliding
the slider according to the arrow and pull out/ pull the tube
together.
B
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A.
Does not cause interferences with audio/video devices.
Noise level: max. 78 dB(A).
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Appliance elements
A
1 Cord rewind button
2 Combination brush fastening
3 Plug and cord
4 Filter cover release button
5 Outlet filter cover
6 Suction power regulation slider
7
Dust bag full indicator
8 ON/OFF button
9 Handle
10 Front cover fastening
11 Slider – mechanical suction power regulator
12 Suction hose
13 Telescopic suction tube
14 SAFBAG dust bag module (with the installed SAFBAG
dust bag)
VACUUM CLEANER ZVC542... TYPES
Workmanship
and
equipment
option
VIB
Suction power regulator
Overheating protection
Safety valve
Parksystem „Auto-start”
Bag loading indicator
No bag protection
Dust bag / amount
Outlet filter
Suction tube
Combination brush
Small nozzle
Crevice nozzle
Small brush Turbo brush
Parquet brush “BNB”
1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17
ZVC542HT
ZVC542HTUA
+ + + + + + SAFBAG 1 piece HEPA H13 Telescopic + + + + + +
ZVC542ST
ZVC542STUA
+ + + + + + SAFBAG 1 piece HEPA H11 Telescopic + + + + + –