Zelmer 01Z014SK Voyager Twix, User Manual

Page: 35 / 40

35
Adjust the telescope sucking pipe length in desired work-
–
ing position (depending on user’s height) move the knob in
direction indicated by the arrows.
Gentle fabrics, small soft area
Small nozzle is good for vacuuming: small gentle surface and upholstery. We recom-
mend reducing suction power during such activity.
PREPARATION FOR OPERATION
Insert the hose into the vacuum cleaner inlet press it gently
–
„A” . Gentle clicking sound is an evidence of proper hose
assembling. To remove the hose „B” Press two buttons” „C” at the hose ending.
Connect later ending (handle) with telescope sucking pipe.
–
Start up the vacuum cleaner pressing ON/OFF button at the
–
vacuum cleaner and adjust proper suction power with elec-
tronic regulation knob or with the knob on hose handle.
SUCTION POWER ADJUSTMENT
The vacuum cleaner is equipped with electronic power adjustment, which enables fluent
power regulation. Moving the knob according to mars on the appliance shall cause in-
crease or reduction of suction power. ZELMER vacuum cleaners are also equipped with
mechanical suction adjustment on hose handle. To reduce or increase suction power it is
enough to move the knob in direction indicated by the arrow.
VACUUMING
Select proper nozzle or brush:
Soft surface – carpets and fitted carpets, etc.
We recommend you to use brush-nozzle with sucking pipe and switch it for carpet clean-
ing function: hidden brush - according to the figure beside ).
Hard surface – wooden, floor, laminates, ceramic tiles, etc.
We recommend you to use brush-nozzle with brush out - according to the figure
beside .
Gaps, corners, cavities, etc.
Gap nozzle is used for vacuuming: gaps, corners, spaces and other recesses with
difficult access.
Small hard areas
Small brush his good for vacuuming small, hard areas – which are im-
possible to reach with brush -nozzle. We recommend reducing suction
power during such activity.
Voyager vacuum cleaner can be used with Zelmer turbo brush
It is used for more effective vacuuming of carpets and fitted carpets. Turbo brush usage significantly increases the ef-
ficiency of removing thready dirties such as: fur, hair, threads, etc. It is especially useful in flats, where animals are kept
(cat, dog) and it is usually difficult to remove all fur from carpets and fitted carpets.
In case the turbo brush sucked itself onto a surface, reduce suction power moving the knob into Min direction. Moving
the knob in Max direction increases suction power.
Take care for the brush cleanness on the shaft. Remove threads or hair, etc. from the haft if necessary.
ATTENTION! Unplug before turbo brush cleaning – remove the plug form the mains supply outlet.
AFTER OPERATION
Switch off pressing ON/OFF button.
–
Unplug from mains supply outlet.
–
Rewind the cord pressing cord rewind button. Hold the plug when rewinding, do not allow the cord to get entangled
–
and the plug to bump the casing.
You can store the vacuum cleaner in both horizontal and vertical positions. The hose can remain fitted, but please be
careful not to bend it too much.
B
A
C
C
Red symbol Yellow
symbol
Min.
Max.
Assemble selected accessory
–
to telescope pipe.
Take the power cord out of the vacuum cleaner casing and
–
connect it into the mains supply outlet.
ATTENTION! Be careful during pulling the cord out, the yellow mark on the cord
show the end of the cord.