Zelmer 01Z014SK Voyager Twix, User Manual

Page: 37 / 40

37
After cleaning the filter or applying a new one:
Insert the filter into the dust compartment back to previous position.
–
Insert assembled dust compartment into vacuum cleaner. See
–
„CYKLON” dust compartment assembling and removing .
2. Motor protecting filter - exchange
Switch off the vacuum cleaner and unplug from the mains supply outlet and open it as for dust compartment exchange.
–
Remove and empty dust compartment.
–
Remove motor protecting filter grid out of the runners at the back wall of the chamber.
–
Remove motor protecting filter out of the grid. Wash the filter, rinse it and dry thoroughly.
–
ATTENTION! It is not allowed to wash the filter in washing machine or dry in drying
machine.
Insert clean filter or a new one into the grid.
–
Insert the grid including filter into the runners back to previous position.
–
ATTENTION! It is forbidden to assemble damp motor filter from safety reasons. Always
replace damaged motor protecting filter with a brand new.
3. HEPA outlet filter – exchange
Switch off the vacuum cleaner and unplug from the mains supply outlet.
–
Open the upper lid as described above.
–
Remove HEPA outlet filter located under upper lid.
–
Clean (blow) the fold of HEPA basic filter. You can also rinse HEPA with running water. Dry thoroughly after rinsing.
–
Replace clean and dried HEPA filter, or insert a new one.
–
ATTENTION! HEPA outlet filter should be replaced with a new one always when it is damaged.
CLEANING AND MAINTENANCE
Remember to check if the vacuum cleaner is unplugged before cleaning and maintenance. Clean the casing and bag
chamber with damp cloth (it can be wet with wash – up liquid) dry or wipe up to get it dry. Do not use abrasive agents or dissolvent. Vacuum the
nozzle-brush, small brush or special accessories with a gap nozzle from time to time.
WHAT TO DO WHEN…?
The vacuum cleaner suction is low:
Check the dust bag - replace it.
–
Clean the dust bag and filters.
–
Check the accessories - unblock.
–
It is difficult to move the nozzle:
reduce the suction power; cleaning efficiency will not be lower.
–
The dust bag or filters have been damaged:
check and exchange the dust bag and filters.
–
An electric fuse functioned:
check if there are any other electric appliances connected to the same electric circuit,
–
if the fuse functions repeatedly, bring your vacuum cleaner to service desk.
–
The vacuum cleaner is not in operation, the casing or power cord is damaged:
bring your vacuum cleaner to service desk.
–
ECOLOGY – ENVIRONMENT PROTECTION
Each user can protect the natural environment. It is neither difficult nor expensive.
In order to do it: put the cardboard packing into recycling paper container; put the polyethylene (PE) bags into container for plastic.
When worn out, dispose the appliance to particular disposal centre, because of the dangerous elements of this appliance, which can
be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product any time in order to adjust it to law regulations, norms, directives, or
due to construction, trade, aesthetic or other reasons, without notifying in advance.