1.
Check
the microscope if everything looks clean and normal. If not, report
it in the logbook.
2.
Start
the system with the
Main switch
(on the microscope panel, located
on the laser box)
3.
Switch
the
Systems/PC
ON (on the microscope panel, located on the
laser box)
4.
Switch
the
Components
ON (on the microscope panel, located on the
laser box)
5.
Switch on
the left computer
6.
Login
to the computer with your account
7.
Wait
1 min so the system is fully booted
8.
Start
the
ZEN
software
9.
If there is a connection problem with the Real time PC (PC on the right
side), switch off everything and
reset the real time PC
with its reset
button on the front.
10.
If you want to use the followings,
turn on
:
a.
Argon lasers
: small black box located on the laser box, turn on with
the key on the box and put the switch on the LASOS control panel
to “RUN”