7
EN_40_070_0011I | Service Manual | Lamp replacement and calibration - Corona extreme
Getting device information
Lamp Replacement and Calibration Corona extreme
4
Enter the IP address of the measuring system or perform a scan
Note
IMPORTANT NOTE REGARDING THE IP ADDRESS RANGE
Make sure you are working in the same IP address range when you connect
the device to the test computer. You may need to adjust the IP address range
on the test computer.
Enter the IP address of your device under
Hardware settings
>
IP address
or
click the
Scan
button to perform an address scan .
Fig. 2 Entering or scanning the IP address
