42
Lamp replacement and calibration - Corona extreme | Service Manual | EN_40_070_0011I
Performing sensor calibration
Lamp Replacement and Calibration Corona extreme
The following screen displays additional information about the selected device.
Fig. 46 Device information displayed
Click
to proceed to the next step.
6
Select test block/device profile
A scan is performed for potential / available / connected test blocks / device
profiles.
Select a test block.
Fig. 47 Selecting device profile
Click
to proceed to the next step.
= Skip to next
program section
= Restart workflow
Connection status:
yellow: "connected to device"
gray:
"not connected"
Profile:
Sapphire Flange
Reference holder:
“1462-668”
Profile:
Sample pan - 5.5 mm
thick base (in TURNSTEP)
Reference holder:
“2130-893”
Profile:
Sample pan - thin base
(in TURNSTEP)
Reference holder:
“2285-627”