Axiolab A
Carl Zeiss
B 40-015 e 06/99
3-3
3
OPERATION
3.1
Switch on the Instrument
•
Switch on the instrument via the on/off switch
(3-1/
6
).
−
The green line control lamp in the switch (3-
1/
6
) must light up.
−
The halogen lamp 6 V, 30 W in the
reflected-light illuminator (3-1/
2
) must light
up.
☞
The “
I
” is visible when the on/off
switch is switched on and the "
0
" is
visible when the on/off switch is
switched off.
•
Set the required image brightness via the
illuminance control (3-1/
5
).
•
Depending on what is required, insert
attenuation or conversion filter in the filter
slider (3-1/
3
) and push the slider in the beam
path (also see section 2.7).
•
Swing required objective (3-1/
7
) in the beam
path; make sure to operate the nosepiece only
via the knurled ring.
☞
For observation, the pushrod (3-1/
4
) must be pushed in. In this position, 100 % of the light of
the beam path is directed to the observation port of the binocular tube (3-1/
1
).
Fig. 3-1
Switch on the instrument
Summary of Contents for Axiolab A
