Axiolab A
Carl Zeiss
B 40-015 e 06/99
2-5
2.3.2
Compensation of Ametropia when Eyepiece Reticles are used
The correct use of an eyepiece reticle requires two focusing eyepieces, e.g. PL 10
×
/20 Br. foc., to enable
compensation of ametropia.
•
Use the eyelens of the focusing eyepiece to focus on the line figure of the eyepiece reticle; focus on
the edge of the field of view if no eyepiece reticle is used.
•
Focus on the microscope image of a specimen via the focusing drive by looking through the eyepiece
with reticle.
•
When the image and the eyepiece reticle are in focus in the above eyepiece, focus the image for the
second eye via the focusing eyelens of the second eyepiece.
☞
The position of the focusing drive on the stand must not be changed.
2.4
Setting of Interpupillary Distance
•
The eyepiece distance is matched to the individual interpupillary distance by swinging the eyepiece
tubes symmetrically towards one another. The eyepiece distance can be set in the range between 55
and 75 mm, and you should try to remember the individual value once set.
Summary of Contents for Axiolab A
