Laser Radiation
Do not stare
into Beam
LASER CLASS 2
EN608 25-1:2003
P>1mW, 633-650 mm
Seite 9/69
Seite 9/41
FDM-T-Sports
2.2.2. General safety instructions
■
The application and operation of the system and the evaluation of the measuring
data and their interpretation may only be carried out by trained qualified personnel.
The manufacturer assumes no liability for any injury to persons, damage to property,
or loss of data due to improper use of the software, the device or its component parts.
■
The client’s data and measuring data may only be copied, moved or deleted using the database
function provided by the zebris application programs. In the case of data being changed inten-
tionally without using the database functions, the user alone bears the full risks involved.
■
Should there be any detectable damage to the device or component parts, they should be re-
turned to the manufacturer for a safety check. It is not permissible to continue using the device
or its component parts, as severe damage, and serious injuries – even lethal injuries - may result.
The manufacturer or authorized sales partner must always be contacted in all cases of fault or doubt.
■
If any fluids should penetrate the device, it is mandatory for the device to undergo a technical,
safety test. Damaged plug connections and leads are to be replaced by an authorized service
technician. The device must be put out of operation immediately, marked as “
Not working“
and prevented from being used by removing the mains cable. Please refer to an authorized
technician immediately.
■
Be sure that all the mains and connection cables are laid safely and that they are protected
against stepping on, so that nobody can trip over them. Check all the cables and the connection
plug regularly for any damage. Damaged power supplies and cables must be replaced before
further operation.
■
Never insert any objects in the components of the measuring system.
■
A highly precise speedometer is integrated within the FDM-T System. This
device contains a laser Class 2 (
= 650 nm, P > 1 mW). It is strictly forbid-
den to remove all covers of the treadmill which are marked with the symbol
shown left if the measuring platform is connected to mains supply (if the
external power supply unit of the platform is plugged to mains supply).
Caution: If other procedures than those described within this user manual
are conducted, dangerous laser radiation can be released. Direct eye contact
with the laser beam may lead to serious injuries of the eye.
