Seite 4/69
Seite 4/41
FDM-T-Sports
5 Setup and operation of the FDM-T system
5.1. Positioning of the measuring system
5.2. Connection of the measuring system to mains supply
5.2.1. Power supply of the FDM-T sensors
5.2.2. Connection of the system
5.3. Computer requirements
5.4. Installing the zebris FDM-T software
5.5. How to switch the FDM-T sensor on/off
5.6. Setting the system out of operation
5.7. Recommendations for recording data
5.7.1. Treadmill analysis
5.7.2. Data recording
5.7.3. Walking speed
5.7.4. Posture
5.7.5. Weals
6 Maintenance and safety inspections
6.1. General maintenance procedures
6.2. Mandatory periodic inspections and STK
6.3. Maintenance of the FDM-T sensor
6.3.1. Control procedures
6.3.2. Calibration procedures
6.4. Troubleshooting
6.5. Cleaning and disinfection
6.5.1. Cleaning procedure
6.5.2. Disinfection procedure
6.6.1. Packaging
6.6.2. Weee-directive
6.6.3. Accumulators and batteries
32
32
33
33
34
34
34
35
35
35
35
35
35
35
35
36
36
37
38
38
38
39
40
40
40
41
41
41
41
