Seite 24/69
Seite 24/41
FDM-T-Sports
4 Video-module
4.1. Conection to the FDM-T system
The FDM-T system can capture data simultaneously with up to 4 video cameras. For this purpose,
the zebris SYNCCam is available as an accessory. To capture video data synchronized with pressure
data the camera must be connected to the galvanically isolated Viodeosync. socket on the interface box.
Videosync. and USB socket at the backside of the tradmill (PDM-C sensor)
4.1.1. Connection to the zebris SYNCCam
The zebris SYNCCam uses its integrated synchronization fl ash to synchronize video data with pressure data.
For connecting the SYNCCam the following synchronization cable is required:
REF 21030316
Videosync. Control Cable 5
Length 5 m, both sides phone jack 3.5 mm
Videosync.
