To maintain undisturbed transmission of the video signal it is mandatory
to use high quality USB cables.
Please, only use cables supplied or recommended by zebris for connecting
SYNCCam and PC.
The Sync-LEDs are fl ashing when the camera is disconnected from the
USB port. Therefore, it is strongly advised not to look directly into the
camera when it is disconnected to avoid dazzling.
Seite 27/69
Seite 27/41
FDM-T-Sports
4.3. SYNCCam HS
The SYNCCam HS is an accessory of the FDM system and perfectly adapted to be used in combina-
tion with the force distribution measurement. All adjustments of the camera are carried out via
hardware setup integrated to the zebris FDM software. The camera is connected to the PC by a USB
cable of type A-C included within the shipment.
The camera is equipped with one ¼ inch tripod thread and can be adapted to zebris tripods as well
as commercially available camera tripods.
Technical specifi cations
REF
01540192
Dimensions
174 x 104 x 59 mm (B x W x T), with aperture 78mm width
Weight
approx. 275 g
Power Supply
USB 3.0 (5V DC/500 mA)
Resolution
max. 1920 x 1080 Pixel (Full-HD)/Autofokus
Frame Rate
max. 120 Hz
Synchronization
LED-Flash triggered by SYNC-IN socket os infrared
Mounting
¼” tripod-thread at back side
¼” tripod-thread
VIDEO
SYNC
sockets
Flash LEDs
Status LED
USB-
socket
3.0
Typ C
IR-SYNC
Removable
aperture
