User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
86/193
1.
Confirm by pressing
SET
until you enter the settings menu.
2.
Enter the following menus and set the parameters indicated:
d.
CT
:
i.
Press
SET
to enter the menu
ii.
Write“40”:
1.
From the first screen where the number "1" appears, press" " repeatedly until the number
"10" appears.
2.
Press
"SET"
once to move the cursor to the left to highlight "10”
3.
Press the button ”→” several times until you enter the number "40"
Note:
In the event of an error, press "SET" until the number of thousands is highlighted and then
press " " until only the number "1" appears;
at this point repeat the procedure described above.
iii.
Press “ESC” to confirm “→” to scroll to the next setting
e.
ADDRESS:
i.
Leave the address 01 (set by default) in this way the inverter will assign as power relative to
the exchange the data sent by the meter.
