User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
83/193
To configure the Meter reading on the inverter:
1.
Press the first button on the left of the display:
2.
Press the last arrow on the right (enter) to access the advanced settings (enter password 0715):
1.
Basic settings
2.
Advanced settings
3.
Production statistics
4.
System Info
5.
Event list
6.
SW Update
3.
Now press the last arrow on the right to access the Set ElectricityMeter
1.
Battery parameters
2.
Active battery
3.
Zero feed-in mode
4.
IV Curve Scan
5.
Logic interface
6.
Factory reset
7.
Parallel settings
8.
Reset Bluetooth
9.
CT Calibration
10.
Set ElectricityMeter
11.
NeutralPointGrounding
4.
Now press the last arrow to enable.
