Page - 44/85
AF2ZP0CL - ACE2 - User Manual
SUBMENU "SPECIAL ADJUST"
1) ADJUSTMENT#01
Reserved.
2) ADJUSTMENT#02
Reserved.
3) SET
CURRENT
It adjust the regolation of maximum current. It shouldn’t be changed.
4) HIGH
ADRESS
Reserved.
5) DEBUG
MODE
Reserved.
6) INVERTER
TYPE
It decides what kind of inverter is used.
0 and 1: traction.
2 and 3: pump.
The change of this parameter changes the other parameters at the next
keyoff.
7) SAFETY
IN
0: input allways closed (bridged)
1: safety_in_drived: safety came from a different controller, need a can
handshake.
2: general purpose input (not jet defined. Need hardware change).
8) SAFETY
OUT
0: none : fa comunque la diag all'init per verificare il funzionamento.
1: driver: is for drive a safety in.
2: general purpose: standard function: reverse direction indicator.
9) MAIN
CONTACTOR
OFF No main contactor (directly connect to +Battery)
ON Main contactor in stand alone config
OPTION#1
Trpump 1 only MC
OPTION#2
Trpump 2 MC
10) AUX OUT FUNCTION
ON/OFF. If OFF, A18 is not drived and without diagnosis.
Summary of Contents for ACE2
