ZANOLLI TEOREMA POLIS PW, Manual For Installation, Use And Maintenance

Page: 20 / 72

4. FUNCTION
TEOREMA POLIS PW 20
NOTE: BY SETTING BOTH THE OVERHEAD AND BEDPLATE
RESISTORS TO “0” THE OVEN WILL NOT HEAT.
NOTE: CHECK THAT CHOSEN OVERHEAD AND BEDPLATE
VALUES ARE APPROPRIATE TO THE SET COOKING CHAMBER
TEMPERATURE. BY CHOOSING LOW OVERHEAD AND BEDPLATE
START TIMES, THE SET CHAMBER TEMPERATURE MAY NEVER BE
REACHED.
5) Once the Vaporizer has been activated
(see 4.3.6), modify timer values with the
“data increase and decrease keys” (Fig.7).
The
programming range of the
vaporization parameter is between 1
and 4.
Each value corresponds to a certain time
(seconds) of vapor emission:
value 1 = 2 seconds of vapor;
value 2 = 4 seconds of vapor;
value 3 = 6 seconds of vapor;
value 4 = 8 seconds of vapor.
6) Once setting is finished, save data by
pressing and holding the “P” key for 10
seconds until (you hear) the acoustic
signal (Fig.8).
7
8