ZANOLLI TEOREMA POLIS PW, Manual For Installation, Use And Maintenance

Page: 13 / 72

3. INSTALLATION
TEOREMA POLIS PW 13
The Manufacturer cannot answer for damage caused by ignoring
these abovementioned norms as well as the information in this
manual.
To locate exhaust see Annex B
3.7. Checking before starting work
After completing installation of the unit a series of checks must be carried
out, listed as follows:
- check that the various disassembled parts have been assembled
- check the electrical power connections;
- check that the control panel is working
- If present, check that the ventilation hood is working
IMPORTANT
– TURNING ON FOR THE FIRST TIME
The components of a factory new oven (cooking surfaces of refractory or
sheet metal material) need to be subjected to an initial preheating.
BRINGING THE OVEN UP TO TEMPERATURE OVER A PERIOD OF 5-
6 HOURS (1°h=100°C - 2-3°h=150°C - 4°h=200°C - 5°h=250°C -
6°h=300°C); the first time the oven is turned on this is an
INDISPENSIBLE procedure to avoid possible damage to the above
mentioned parts.