ZANOLLI TEOREMA POLIS PW, Manual For Installation, Use And Maintenance

Page: 11 / 72

3. INSTALLATION
TEOREMA POLIS PW 11
2
3.4. Positioning and mounting the unit
1 - Position the module on the
base /cell/other unit, manoeuvring
it as described in paragraph 3.3
(Fig.2)
2 - Allow the four fixing
flanges on the corners of the
oven to drop into position (Fig.2)
3 - Secure with the screws
provided (Fig.2)
NO MORE THAN 3 UNITS
SHOULD BE STACKED ONE ON
TOP OF THE OTHER
When one or more units
is mounted on top of another,
use high heat silicone to seal
around the vapor exhaust tubes
at the back, at the point where they join.
3.5. Electrical connection
Before making any connection, check that the specifications of the
electrical supply to which the equipment must be connected, correspond
to the specifications of the power supply required by the apparatus itself
(see Annex A).
The appliances are supplied with an earthed electrical cable for
connecting the appliance to the power grid according to the supply
required (see Annex A).
In compliance with the safety norms in force,
it is obligatory to
connect the ground/earth cable (yellow-green) to an earthing system
with the same dispersion capacity as the appliance itself. The
efficiency of this system must be correctly verified according to the
norms in force.