ZANOLLI TEOREMA POLIS PW, Manual For Installation, Use And Maintenance

Page: 19 / 72

4. FUNCTION
TEOREMA POLIS PW 19
OVERHEAD
ELEMENT
Value
BEDPLATE
Value
Resistors time [s]
ON OFF
0 0 0 45
1 1 5 40
2 2 10 35
3 3 15 30
4 4 20 25
5 5 25 20
6 6 30 15
7 7 35 10
8 8 40 5
9 9 45 0
[s] = seconds
Attention
: the total duration of the resistors’/resistances’ starting cycle is 45 s
2) Modify the temperature using the data
increase and decrease keys (Fig.4).
3) Modify cooking time through the
“data increase and decrease keys”(Fig.5).
The programming range of the cooking
timer is between 1 minute and 24 hours.
NOTE: THE COOKING TIMER CAN
BE SET TO ENDLESS BY SELECTING
THE 4 DASHES ON THE DISPLAY
(VALUES BETWEEN 00 and 23 IN THE HOUR PARAMETER AND
BETWEEN 00 and 59 IN THE MINUTE PARAMETER).
4) Modify overhead and bedplate power
through the “data increase and decrease
keys (Fig.6).
NOTE: Each unit displayed on the
screen is equivalent to 5 seconds during
which the combined resistors/resistances
will remain on/active. Resistors/resistance
will remain off/inactive in the remaining units. The cycle has a total
duration of 45 seconds.
The start time value of the two resistances can be modified anytime by
the user, even during a cycle.
The following table shows timing combined with the starting values of
the overhead and bedplate resistances .
4
5
6