ZANOLLI TEOREMA POLIS PW, Manual For Installation, Use And Maintenance

Page: 23 / 72

4. FUNCTION
TEOREMA POLIS PW 23
K- CAM
K-TIMER
K- SKY
K- STALL
K- UMID
K- PROG
K+ CAM
K+TIMER
K+ SKY
K+ STALL
K+ UMID
K+ PROG
Display LCD 64x128
K - K +
Programming shifts to PROGRAM
NUMBER
setting (Fig. 5). Use the “data
increase and decrease” keys to set
PROGRAM NUMBER. (Fig.5). Once
you reach the desired value press the
“clock” key (Fig.6) to save and shift to
parameter
settings of the second
programmed start of the day.
Repeat the steps described above to set
the
second programmed start if
necessary.
You can set programmed starts for
every day of the week. After saving the
last parameter (Sunday) the system will
highlight the initial enabled or disabled
programmed start data again.
To exit and return to active mode “ON” press and hold the “clock” key for
5 seconds. (Fig.6).
NOTE: In
turning the system into inactive mode “OFF” when programmed
start is enabled, the “clock” key led will be on (Fig.6) and the following
screen is displayed
:
System in “OFF” mode
Clock: date and time blinking
First programmed start time not blinking
Programmed start day
Selected program name and number
5
Second programmed start time not blinking
6