H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Tel +49 241 9105010
Fax +49 241 91050138 • [email protected] • www.zander-aachen.de
72
Operating manual ZX09/20/21-Series
Step 5 is omitted, since the application does not provide an encoder.
14.6
Step 6: Controlling the function of the PLC via the LEDs
After successful programming and connection of the inputs, the function is checked via
the LEDs on the controller. Step 6 is skipped because no network is connected.
Step 7 is omitted because no data communication is provided in the application.
14.7
Step 8: Connecting the digital outputs
Fig. 36 shows the connection of the digital outputs. As with the connection of the in-
puts, make sure that the cabling is connected to the correct terminals.
Thus, the control from the first trapdoor must be connected to terminal 1 and the con-
trol from the second trapdoor to terminal 2. The connection is made as described in
chapter 5.6.1 "Connecting the digital outputs".
Fig. 35: Connection of the inputs
108
Pwr
Digital Output
Digital Input
Digital Input
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
U
Power
L M M
Digital Output
01 02 03 04 05 06
07 08 09 10 11 12 13 14 15 16
Height sensor
Light barrier 1
Light barrier 2
Colour sensor
