H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Tel +49 241 9105010
Fax +49 241 91050138 • [email protected] • www.zander-aachen.de
10
Operating manual ZX09/20/21-Series
3.3
Intended usage
The ZX09- und ZX20/21-Series have been designed for the use in machines and
plants for industrial use. They must be installed in switch cabinets or appropriate hous-
ings with minimum degree of protection IP54. The approved operating parameters for
use must be complied with (see chapter 12 “Technical data”).
The inputs and outputs have to be connected accordingly.
The controls can be integrated as slaves into an existing Modbus TCP/IP network or
build an existing network with the Multimaster protocol “ZanderNet“ via the
Ethernet-interface.
The controllers ZX20TP and ZX21TP can be integrated as slave (PROFINET IO-
Device) into a PROFINET-network. The controls ZX20TC and ZX21TC can be ad-
dressed as slave in an EtherCat-network.
3.4
Exclusion of liability and warranty
If the conditions above are not complied for the intended use, the safety instructions
are not followed, or maintenance work is not performed as required, it will lead to a
disclaimer or loss of warranty.
3.5
Function
The function of the device depends upon the loaded user program. The logic stored in
this program determines how the input signals are evaluated and the outputs switch.
Note!
The user is responsible for the integration of the device into the overall
system. For this, the correct electrical installation and the correct pro-
gramming of the ZX09, ZX09A, ZX09B, ZX09C, ZX09D, ZX09E,
ZX20T/TP/TC or ZX21T/TP/TC must be verified.
