8
STEP 7 - DRUM & BASE ASSEMBLY
TIPS:
1. Lock the rear wheels so the
base doesn’t move around.
2. Make sure the base is on a
flat surface.
3. Use two people to lift the
drum up onto the base.
4. Align the base holes with the
threaded holes in the drum.
5. Do NOT fully tighten all
screws until doors are in place
and level.
STEP 8 - HOPPER & DRUM
Inside
Drum
Connect
Cable
TIPS:
1. Connect the temperature sensor cable BEFORE fully pushing the hopper into the grill.
2. The hopper is heavy so get assistance from somebody when sliding into the grill drum and
attaching the bolts. Ensure the rear wheels are locked.
3. Finger tighten all 4 bolts evenly before tightening with the spanner. Do not over-tighten!
4. Neatly bundle the cable using the twist tie wire from the power cable. Slide the cable
bundle down between the hopper and drum.
Tuck cable down between
the grill drum and hopper
B
Bolts and washers are
attached to the hopper,
not in tool kit.
