24
13. Grill Repair Instructions
Component
Time
Difficulty Spare Parts
Tools Required
Fuse
5 min
3A M205 Fast Blow
Fuse 5 x 20mm *
✓
Phillips head screw driver
✓
Wire snips or scissors
Temperature
Sensor
5 min
ZG-700-TSENSOR
✓
Phillips head screw driver
✓
Pliers or small socket/spanner
set
Controller
Board
20-30 min
ZG-CONT-WIFI
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Pliers
Fire-pot Fan
20-30 min
ZG-FPFAN
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Pliers
Ignition Rod
30-40 min
ZG-SN-IROD
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Wide Pliers or Small socket
set
Auger Motor
30-40 min
ZG-AMOTOR-1.6
✓
Phillips head screw driver
✓
Wire snips or scissors
✓
Pliers
* This is standard type of fuse widely available from electrical suppliers and retailers.
DANGER!
HIGH VOLTAGE: Unplug the grill from electric power supply before
completing any repairs. Only plug into power once all repairs are
complete and covers are back in place.
Questions?
•
Send a product support request on our website. (BEST OPTION)
•
Contact Z Grills Australia customer support at [email protected]
•
All key components can be replaced DIY by a “handy person”.
•
If a handy person is not available to complete the repairs, a BBQ repair shop,
mechanical or electrical equipment repairer should be able to complete the work.
•
Do not complete any repair work yourself unless suitably experienced and confident to
do so.
•
Refer to the table below for estimated time, di
ffi
culty, parts and tools required.
•
How to repair videos are available on the Z Grills Australia website.
Scan for help
information
Scan to go to
support page
