76-QD0460EN-01Y00-00
10
■
3. Overview of The Product
This product is a shut-off tool which is used for bolt tightening, and will stop automatically according
to the tightening conditions. For tightening parameter setting, use the specially prepared
programing console PC-1 and cable CC-1 for the product.
By connecting YZ-TH to PC-1 via CC-1, the reference of rundown results and the test mode can be
possible in addition to the tightening parameter setting.
※
[Setting device] described in this instruction manual, means programing console (PC -1) and
special cable (CC-1) in connection.
The battery pack should be detached from YZ-TH when connecting/disconnecting the
setting
device to or from YZ-TH..
Connecting/disconnecting the setting device, in the state that YZ-TH runs, can be a cause
of failure.
When connecting and disconnecting the setting device to or from YZ-TH, treat the
connector carefully. Otherwise, it may result in the breakdown.
Close the shutter of the cable connecting port on the YZ-TH till it locks, when the
setting
device is not connected.
Setting
Device
設定器
CC-1
YZ-TH
PC-1
