76-QD0460EN-01Y00-00
4
●
Installation, Environment
Warning
・
This product is for the indoor exclusive use. Do not use it in rain, in a damp place and a wet place.
・
Dark or messy workplace could result in accidents. To avoid that, pay careful attention to lighting and
make efforts to keep the workplace clean and tidy.
・
To protect yourself, wear personal protective equipment such as a hard hat(helmet), safety glasses,
safety shoes. And depending on work environment, wear earplugs, a dust mask etc.
・
Dress properly. When working, do not wear loose clothes or jewelry such as necklace. If your hairs are
long, bundle them with rubber ring to avoid contact with the tool and wear a protective cover such as
cap. Otherwise, it may cause injury.
・
Do not use this product in a place likely to be exposed to water, direct sunlight, much dust, heat, oil,
or moving parts of industrial equipment. Otherwise, it may cause fire, electric shock, or accident.
・
Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases
or dusts. There is a fear of fire.
Other than that, do not use in a place with electrical and mechanical
harmful atmosphere.
・
Use it away from things that generate large noise (welding machine · DC motor with brush etc.).
・
Do not place inflammable materials nearby. There is a fear of fire.
・
Do not make the foreign object such as metal pieces, invaded to the product. There is a fear of fire.
・
Use the battery charger at rated supply voltage (AC 100 -240 V).
Do not use DC power supply, engine generator, or power transformer. Failure to do so may result in
heat generation and fire.
・
Be sure to fully insert the power plug of the battery charger. Failure to do so may result in electric shock
or fire due to heat generation.
・
If you do not use the product, unplug the battery charger.
Wipe out dust or stain accumulated on the power plug or receptacle with a dry cloth.
Failure to do so may result in electric shock or fire.
・
Do not insert or remove the power plug of the battery charger from the receptacle with wet hand. There
is a fear of electric shock.
・
Charge the battery pack in well-ventilated place. While charging, do not cover the ventilation openings
on the battery pack and battery charger with cloth. Doing so may result in rupture or fire.
・
In cold location or before starting the work in winter s eason, use fully charged battery pack.
If the battery pack is at low level, it may not be able to be used due to its protective function.
・
Place the charger in a place of 0 to 40 ° C.
Do not charge the battery pack at less than 0
℃
or more than 40
℃
. Doing so may result in rupture or fire.
・
If this product is suspended by balancer etc., mount YOKOTA-specified hanger to the product.
Use the threaded holes for mounting hanger only for mounting YOKOTA -specified parts.
