76-QD0460EN-01Y00-00
8
in serious personal injury of the user.
・
NEVER make any modification to the tool. Doing so could result in accidents. In addition,
never use the spare part other than the genuine one.
・
Do not hold the power supply cord for battery charger for carrying or pull the cord to unplug it. In addition,
be careful to avoid stepping on or being caught by the cord, and/or damage by excessive force. Damage
of the power supply cord may result in accident.
・
If the tool operates for approximately half of work rate with fully charged battery pack, it means the expiry
of its operating life. Buy a new battery pack.
・
If the tool is not used for long time, fully charge the battery pack before storage.
Even during storage, fully charge the battery pack more than once within one year of last charge.
Otherwise, over-discharge of the battery pack may prevent it from charging.
・
Do not store the battery pack in a place reaching over 50
℃
. Doing so may cause deterioration of the
battery pack and result in smoking or fire.
・
Do not short-circuit the terminals of the battery pack. Do not carry or store the battery pack with metal
object such as nail. Doing so may result in smoking, ignition, or rupture.
・
Attach an anti-short-circuit cap after the battery pack is removed from the tool or the battery charger or
when the tool is not used. Failure to do so may result in short circuit of the terminals of the battery pack
and fire.
・
Wipe out the dirt on the housing of the tool by using the dry and soft cloth.
Do not use the chlorinated solvent, gasoline, thinner and the like, which works to melt the plastic.
・
Store the product in the dry area, where children or untrained person can not get access to.
●
Disposal
Caution
・
Dispose of it according to the method of sorting, laws and regulations, in the used area.
・
Lithium-ion battery used in this battery pack is recyclable and valuable resource.
If it is no longer used, bring it to our distributor, etc. where you have purchased.
●
Others
Caution
・
Keep anyone, particularly children, other than those involved in the work away from the work
site. Not doing so could induce a hazardous situation.
・
Do not touch the oil plug of the tool except repairing. It causes early oil leakage.
・
Using a tool which has been in storage for more than 6 months may cause oil leakage because of damage
to the seal part on the impulse mechanism. We will inspect the tool which has been in storage for more
than 6 months.
・
When using in cold place or in winter season, warming up for the tool is required.
Run the tool for about 0.5 to 1 second several times by loading the main shaft. If the warming up is not
carried out, generating pulses may not be stable.
