YOKOGAWA TB820D User Manual Download Page 43

Page: 43 / 87

<5. FLXA402T sensor menu>

5-2

2nd Edition : June 09 , 2021-00

IM 12E01B30-02EN

5.1

WASH

On Sensor menu, tap

> a dialog to start automatic washing manually

Tap “Start” then Auto Wash. runs only one time. This operation does not affect any automatic

sequence schedule.

When you have a password, a password verification appears. Upon successful confirmation,

Wash screen appears.
For further information on the password setting, see FLXA402T Operation of Converter

12A01G01-03EN

5.4 Password.

5.2 Calibration

On Sensor menu, tap  “Calibration” > Calibration menu
Or on Main screen, tap   “Calibration” > Calibration menu
For further information about Calibration, see “4.   SETTING PARAMETERS”

When you have a password, a password verification appears. Upon successful confirmation,

Calibration screen appears.
For further information on the password setting, see FLXA402T Operation of Converter

12A01G01-03EN

5.4 Password.

5.3

Detail

On Sensor menu, tap “Detail” > to check details (setup, sensor diagnosis, calibration, and

module production number).
In case of trouble, when you contact Yokogawa service, please inform us of the module and

FLXA402T software revision displayed on the Detail under converter menu and sensor menu and

module production number, style number indicated on the nameplate attached to the instrument

Summary of Contents for TB820D
























































































Search results

Summary of Contents for TB820D

Reviews:

YOKOGAWA TB820D, User Manual, Page: 43 / 87

Search results

Summary of Contents for TB820D

Reviews: