YOKOGAWA TB820D, User Manual, Page: 35 / 87

<4. SETTING PARAMETERS>
4-2
IM 12E01B30-02EN 2nd Edition : June 09 , 2021-00
Menu Parameter Default Reference
Diagnosis setting Light source diagnosis Enable 4.3.1
Dried condition diagnosis Enable
Light source operating days Enable
Wiper operating days Enable
Communication
setting
Sensor connection address 1 4.4
*1 Depend on the configured unit of turbidity
*2 Value is preset factory default.
After initialization, set each value to default.
Table 4.2 Converter setting
Menu Parameter Default Reference Note
Auto wash/
cal. settings
Auto sequence for wash/cal. Disable 4.5.1
First start Year YY [year] 4.5.2 Specify the last two digits
of the year (20xx)
First start Month MM 1[month]
First start date DD 1 [days]
First start hour hh 0 [h]
First start minute mm 0 [min]
Auto update of start date Disable
TB
setting
Auto wash function Enable 4.5.3
Wash type Water flow
Auto calibration function Disable
Washing interval 6.0 hour 4.5.2
Repeat count of wash 1 Times
Calibration frequency 0 Times 4.5.4
Drainage time 20 sec
Washing time 65 sec
Wiper driving time 10 sec
Flow waiting time 50 sec
Recovery time 150 sec