YOKOGAWA NEW GREEN SERIES, User Manual

Page: 40 / 98

2-14
<Toc> <2. Initial Settings>
IM 05D01C12-41E 4th Edition: May 31, 2006-00
1.
Bring the operating display into view
(display appears at power on).
P V
AL1 2 3 4
M A N
R E M
S E T / E N T
A / M
Displays
target setpoint-1
“1.SP”.
Displays PV.
2.
Press the S E T / E N T key for more than 3 sec-
onds to call up the menu “OP.PA”.
P V
AL1 2 3 4
M A N
R E M
S E T / E N T
A / M
Displays
symbol “D-U”.
Displays
menu “OP.PA”.
3.
Press the key once to display the
menu “STUP”.
P V
AL1 2 3 4
M A N
R E M
S E T / E N T
A / M
Displays
menu “STUP”.
4.
Press the
S E T / E N T
key once to display the
menu “SP”.
P V
AL1 2 3 4
M A N
R E M
S E T / E N T
A / M
Displays
menu “SP”.
5.
Press the key once to display the
menu “ALM”.
P V
AL1 2 3 4
M A N
R E M
S E T / E N T
A / M
Displays
menu “ALM”.
6.
Press the
S E T / E N T
key once to display the
parameter “AL1” (alarm-1 type).
PV
AL1 2 3 4
MAN
REM
S E T / E N T
A / M
Displays
parameter
“AL1”.
7.
Press the or key to display the
required setpoint. The figure below shows
an example of setting PV low limit alarm.
P V
AL1 2 3 4
M A N
R E M
S E T / E N T
A / M
Blinks during
change.
8.
Press the S E T / E N T key once to register the
setpoint.
PV
AL1 2 3 4
M A N
R E M
S E T / E N T
A/M
You can take the same steps for alarm-2
type (AL2), alarm-3 type (AL3), and alarm-4
type (AL4) that are displayed after this.
9.
Press the S E T / E N T key for more than 3 sec-
onds. This returns you to the display
shown at power-on (figure below).
P V
AL1 2 3 4
M A N
R E M
S E T / E N T
A / M
Displays PV.
Displays
target setpoint-1
“1.SP”.
10.
See “3.5 Setting Alarm Setpoints” when
setting an alarm setpoint.