YOKOGAWA MuR10000, Manual

Page: 120 / 272

IM 04P01B01-01E
5-14
5.5 Setting the Date/Time
This section explains the details of setting the date/time.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Press the key or SHIFT + key to select Clock and then press the
key.
3. Set the date and time and press the key.
Use the key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
4. When the Setting complete screen appears, do either of the following:
To correct the setting, press the key.
If you are done, press the
ESC key.
5.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Set the time.
day
month
year
The new setting takes effect.
ESC/?
Set=Clock
04/02/17 10:39:47
Clock
Setting complete
Explanation
Date/Time
The year is set with the lower two digits.
Values in the range 80 and 99 correspond to 1980 to 1999.
The values that can be entered are as follows. Entering a value outside this range or an
invalid date results in an error, and the date and time do not change.
Month: 01 to 12, Day: 01 to 31, Hour: 00 to 23, Minute: 00 to 59, Second: 00 to 59
<Related Topics>
Changing the printout/display format of the date : Section 7.19