YOKOGAWA FG410, User Manual

Page: 79 / 83

7.1 Handling CD-ROM
7.1 Handling CD-ROM
Handle the CD-ROM carefully as described below.

Store the CD-ROM in a place without direct sunlight, high temperature, and high humidity.

Use and store the CD-ROM in a place without dust.

Do not touch the recording surface directly. It may cause damage or errors.

If it is dirty, wipe it with a soft dry cloth. Do not use any solvent such as benzene.

Store the CD-ROM in a vertical or horizontal position so that it would not be deformed.

When writing on the label surface of the CD-ROM, use a felt-tipped pen (Do not use anything
with a hard point such as a ball point pen or pencil.)
7.2 Replacement of Damaged CD-ROM
If the Arbitrary Wave Edit Software CD-ROM is damaged, contact Yokogawa Test &
Measurement Corporation or your local distributor.
We will replace it with a new CD-ROM at cost.
7.3 Version Check
The Arbitrary Wave Edit Software version number is displayed on the CD-ROM.
The version can be displayed by selecting
[Help] - [About] .
Figure 7-1 Version Dialog Box
IM FG410-61EN
7-2