YOKOGAWA FG410, User Manual

Page: 67 / 83

5.6 Transferring the Waveform and Settings
5.6 Transferring the Waveform and Settings
The system setting screen is used to set the signal generator model, interface, and serial number.
This screen is also used to transfer the signal generator settings or waveform data to the signal
generator.
In addition, the vertical/horizontal axis unit displayed on the waveform display screen can be set on
this screen.
Select
[Setup] - [Setup]
( Alt , S , S )
to open the system setting screen.
Figure 5-7 System Setup Screen
−
System Setup
The system setting screen consists of four “tab pages”:
[System]
,
[Unit]
,
[Waveform]
, and
[Oscillator] .
5.6.1 Model setting
The [Basic Setup] frame on the [System] page is used select the signal generator model and the
interface and set the serial number.
a) Selecting the target model
Click the button to the right of [Model] to display the list of supported signal generator models.
Click one in the list or press the ↑ ↓ → ← keys to select a model.
The setting item and settable range in [Waveform] and [Oscillator] vary depending on the
selected model.
The selected model is saved even after the
ARB Edit is exited and the same setting applies at the
next startup.
IM FG410-61EN
5-22