YOKOGAWA FG410, User Manual

Page: 61 / 83

5.4 Operation Between Waveforms
5.4 Operation Between Waveforms
The inter-waveform operation screen is used to create a wave form by performing arithmetical
operations to the waveform in the selected range, standard waveform, numerical expression
waveform, or the clipboard waveform.
Click the button on the tool menu or select
[Tools] - [Operation]
( Alt , T , O
) to open the
inter-waveform operation screen.
Figure 5-5 Inter-Waveform Operation Screen
Immediately after creating a waveform on the inter-waveform operation screen, the status before
waveform creation can be recovered by selecting
[Edit] - [Undo]
(Alt
,
E
,
U )
, or pressing
Ctrl + U
.
Inter-waveform operations are in the selected range. Select the range beforehand on the waveform
display screen with markers A and B.
5.4.1 Operation types
Clicking the button to the right of
[+]
, the +-*/ arithmetical operations list is displayed.
Select an operator by clicking the item in the list or pressing the ↑ ↓ → ← keys.
Note that
[*]
indicates multiplication ( × ) and
[/]
indicates division ( ÷ ).
5.4.2 Object of operation
a) Waveform generation
Clicking the
Created Waveform
button or pressing
Alt + W
displays the waveform generation
screen. Note the following restrictions.
-
[Area(X)] and [Size] cannot be changed.
- The range cannot be divided into multiple pages.
Create a waveform referring to
“
5.1 Generation of Standard Waveform and Numerical
Expression Waveform
”
and click the
Page OK
button. The created waveform is displayed in
the [Clip Board/Created Waveform] area.
IM FG410-61EN
5-16