YOKOGAWA FG410 User Manual Download Page 18 | Manualshive

Page: 18 / 83

background image

2.2 Installation Procedure

IM FG410-61EN

2-3

2.2 Installation Procedure

When installing or uninstalling the software in aWindows 8.1 or Windows 10 environment, log on
as a user who has an administrator privilege.

2.2.1 Installing the USB driver software

The USB driver software can be downloaded from the National Instruments Corporation website.
The procedures for installing the USB driver software are described below.

1. Search for the VISA Run-time Engine page on the National Instruments Corporation website or

select “VISA driver downloads” at the following URL.

http://www.ni.com/support/visa/

2. Download VISA Run-time Engine from the VISA Run-time Engine page.

User registration must be performed at this time. Download VISA Run-time Engine Ver. 4.6.2 or
later.

3. The downloaded file is a self-extracting file. Extract it and install the software.

4. The USB driver software is installed when installation is successfully complete.

For details, visit the National Instruments Corporation website.

After installing the USB driver software, connect the device to the PC as follows:

a) Make sure that the device and the PC are not connected.
b) Power-on the device and connect the device and the PC using a USB cable.
c) The installation process starts automatically. Follow the guidance.

If GPIB is selected as the remote interface of the FG410/FG420, select USB and then follow the

procedure described above.

For details, refer to the “FG400 Arbitrary/Function Generator Communication Interface User’s

Manual”.

CAUTION

«
...
16
17
18
19
20
...
»

Summary of Contents for FG410




















































































Reviews:

No comments

Related manuals for FG410

Brand: Tabor Pages: 111

Brand: Q Acoustics Pages: 7

Brand: G-Lab Pages: 16

Brand: IDK Pages: 44

COMFOSPLIT IKARO

Brand: Ideal Clima Pages: 68

Brand: Coleman Pages: 12

Brand: CEntrance Pages: 14

Brand: EMS Pages: 18

Brand: Monoprice Pages: 2

MOAB30-09HFN8-QRD0GW

Brand: Midea Pages: 172

Brand: Planet Pages: 20

Brand: Planet Pages: 36

Brand: Black Iris For Telecom & Technology Pages: 14

Brand: DX Engineering Pages: 4

Brand: TRUlink Pages: 15

Brand: VigilLink Pages: 14

Brand: BASETech Pages: 8

Brand: Jasco Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands