2. Transportation, Storage and Installation
2-3
TI 33Q01J10-01E
Unloading
Prepare special equipment for unloading. Avoid unloading outdoor in case of rain.
Location for Unloading
To select a location for safe unloading, check that:
• There is ample space for crane and forklift maneuvering.
• Ground is solid.
• The handrails of scaffold can be removed.
• There is enough working space for unpacking (at least 2500 mm by 4000 mm). Provide a
platform if necessary.
• There is a height of at least 3000 mm under the roof.
• Outdoor-indoor temperature difference should be less than 10 °C to avoid condensation.
Keep Upright
Keep crates upright when unloading.
Avoid Physical Shock
Avoid physical shock. Be careful not to lose balance or swing when lifting or placing cargoes on
the ground or platform. Also check scaffold strength.
CAUTION
• When lifting Hardware with a crane, do not unpack it, but attach lifting bolts or wire ropes to
the baseboard positions shown to lift it. Keep the distance between the crane hook and the
cargo to be lifted at a minimum.
• If it is difficult to do this, tie four belts together at a point close to the cargo to keep it from
falling.
• Unpacked items are more likely to lose their balance and fall.
Oct. 22, 2007-00
LPCKIT and YPCKIT with Crane
There are no eye bolts on top of LPCKIT/
YPCKIT for lifting it. When lifting a LPCKIT
or a YPCKIT with crane, use a baseboard
with lifting bolts on front and rear, or use
wire ropes (see figure). Labels indicating
the center of gravity are attached at the
both sides of the package.
F020102.ai
Center of gravity label
Baseboard
Figure Lifting LPCKIT/YPCKIT with a Crane
