6
2 - Unit Designation
2.1- Detailed Unit Designation
Detailed H series gear units designation for ordering
(This Designation is different from the short nameplate designation)
Mounting Position
M1:
Output shaft is parallel to earth, cover is on top
M2:
Gearbox is upright and output shaft is over input shaft
M3:
Output shaft is parallel to earth, cover is on bottom
M4:
Gearbox is upright and output shaft is under input shaft
M5:
While the output shaft perpendicular to the ground and the mounting cover is
on the front, the right side surface (Y1) faces downwards
M6:
While the output shaft perpendicular to the ground and the mounting cover is
on the front, the left side surface (Y4) faces downwards
AX:
Gearbox works in an angle
...T:
with torque arm
IEC Motor Flange Size
Only for HK types
A13:
IEC 132 B5 (300x265x230 mm)
A16:
IEC 160 B5 (350x300x250 mm)
A18:
IEC 180 B5 (350x300x250 mm)
A20:
IEC 200 B5 (400x350x300 mm)
A22:
IEC 225 B5 (450x400x350 mm)
A25:
IEC 250 B5 (550x500x450 mm)
A28:
IEC 280 B5 (550x500x450 mm)
A31:
IEC 315 B5 (660x600x550 mm)
Output Shaft Properties
0:
Hollow shaft
1:
Solid output shaft
2:
Solid output shaft and output flange
3:
Hollow shaft and output flange
4:
Double output shaft
5:
Double output shaft and flange
8:
Hollow output shaft and double output flange
S:
Hollow shaft with shrink disk
E:
Extruder type output
0A:
Drywell gearbox with hollow output shaft
1A:
Drywell gearbox with solid output shaft
SA:
Drywell gearbox with shrink disk
H T 05 2 3 . 0 1 R - M1 / A28
Shaft and Flange Arrangement
Please refer to shaft and flange arrangements section at catalogue
Input Shaft Properties
0:
Standard input shaft
1:
Optional extruder type output
2:
Double input shaft
Number of Gear Stages
2:
Two stages
3:
Three stages
4:
Four stages
Revision Number
Second revision
Gearbox Size
Sizes from 03.......to 22
Version of Gearbox
T:
Free solid input shaft
K:
With IEC B5 flange and free input shaft
TE:
Extruder type with free input shaft
KE:
Extruder type with IEC B5 flange and free input shaft
TB:
Drywell gearbox with free solid input shaft
KE:
Drywell gearbox with IEC B5 flange and free solid input shaft
Serie of Gear Unit
H:
Helical gear type horizontal industrial gear units
B:
Helical gear type horizontal industrial gear units with bevel stage input
Operating Instructions
H Series
YILMAZ REDÜKTÖR
Unit Designation
