43
6.10- Check Accessibility to Filling, Breather and Drain Plugs ;
The filling, breather and drain plugs must be freely accessible for further checking
and service.
7- Mechanical Installation ;
The gear unit can only be installed using the given connection points like foots and
flanges.
To install the gear unit without the given connection points can cause serious injuries
by loosening or breaking the gear unit. Even the gear unit is installed totally correctly
according this manual, be sure that no one will be harmed by accidentally brake
downs or loosening.
The mounting plate must be rigid enough not allowing torsions, flat enough to pre-
vent strains by tightening the bolts and stable enough not allowing vibrations. By
using chain drives this becomes much more important because of the polygon effect
on chain drives. According to your connection elements the maximal permitted radial
and axial load of the gear unit must be in accordance with your application. Check
the product catalogue for permitted radial loads and calculation.
If the output or input shaft is overloaded by radial or axial loads it can cause serious
damage to the gear unit.
Secure the gear unit using 8.8 or higher quality bolts.
Cover all the turning parts to prevent touching. Turning parts can
cause severe or fatal injuries.
For different kind of basic installations refer to the following illustrations.
Operating Instructions
H Series
YILMAZ REDÜKTÖR
Mounting
