10
2.2 Supplying Power
You can power YI HALO using either the portable battery or the AC adapter.
The adapter can also be connected directly to the battery and simultaneously
charge it while the camera is running.
The power light located just above the barrel input on the rig, should be red
when supplying power. YI HALO draws approximately 50 watts when
recording in 2.5K resolution. Under typical operating conditions, a fully
charged supplied portable battery will run YI HALO for over 100 minutes.
2.2.1 Power YI HALO from the AC adapter
1. Connect the power adapter’s DC plug to the power terminal on the rig.
2. Connect the power cord to the AC adapter and plug it into a power outlet.
2.2.2 Powering YI HALO with the Portable Battery
1. Long press the power button on the battery to turn it on.
2. Check the remaining battery charge by observing the status lights on the
side of the battery. 4 lights on indicates that the battery is fully charged.
Summary of Contents for YI Halo
Page 1: ......
Page 20: ...19 2 Disconnect the controller from the USB cable then remove the controller and set it aside ...
Page 42: ...41 Up view for the up camera ...
Page 65: ......