YI Technology YI Halo User Manual Download Page 55

Page: 55 / 65

SD Card Format Not Supported

- Re-insert the microSD card and reboot the rig.
- If the problem still exists, switch the microSD card with microSD card

from another unit camera and reboot the rig.

- If the problem still exists, format the microSD card with a YI HALO

supported format: exFAT or MS-DOS(FAT), insert the formatted
microSD card into the unit camera and reboot the rig.

- If the problem still exists, replace with a new microSD card and reboot

the rig.

- If the problem still exists, replace with a backup unit camera and reboot

the rig.

- If the problem still exists, please contact

[email protected].

SD Card Error. Try to reinsert or format the SD card.

- The microSD card cannot be recognized or accessed. Check that the

card is inserted correctly and not malfunctioning. Check if the card is

- formatted with the right file format. Use a recommended card.

SD Card Full

- Available storage of the microSD card is less than 500MB. The rig

stops recording. Delete some clips to free up some space or replace an
microSD card.

SD Card Almost Full

- Available storage of the microSD card is less than 1GB. You need to

pay attention to the free space.

SD Card Slow

- The performance of microSD card is not good.

- Use a recommended card.

SD Card Formatting Failed

- The microSD card has some problems and cannot be formatted from

the rig. You can try to use a computer to format it.

The rig will overheat soon and may stop recording.

- The hip temperature reaches 203

F (100

). You can stop recording

and shut down the rig when you receive the overheating warning. Place
the rig in a cool location.

Unit camera ran into problems (-18), please reboot.

- Press the reboot button on the pop-up window to reboot the rig.
- If the problem still exists, unplug and plug back in the power supply

cable, then power on the rig by long pressing shutter button.

Summary of Contents for YI Halo


































































Search results

Summary of Contents for YI Halo

Reviews:

Related manuals for YI Halo

Brands by name

Popular brands

YI Technology YI Halo, User Manual

Search results

Summary of Contents for YI Halo

Reviews:

Related manuals for YI Halo

Brands by name

Popular brands