5
|
YETI SNOWMX USER MANUAL
TORQUE SPECIFICATIONS
Refer to the exploded views at the end of the
Manual to obtain torque specifications applied to
bolts at important points on the System.
NOTE: Use a thread locker (Loctite 263 type or its
equivalent) at indicated places in the exploded
views of the system.
STORAGE
CAUTION: Contaminants can alter and corrode the
moving parts of the System during storage.
Performing the prescribed maintenance before
storing the System is strongly recommended.
The best way to store the System is to lay it down
on a wood pallet, away from direct sunlight.
Figure 3
NOTE: Release track tension during storage period
(recommended).
NOTE: Set shock absorber springs at lowest tension
position during storage period (recommended).
ACCESSORIES
A Wheel kit is available to help move your bike
fitted with a YETI SNOWMX Conversion kit.
NOTE: The Wheel kit, shown below in Figure 4, can be
purchased through an authorized YETI dealer.
Part #YAAC1281.
Figure 4
SPEED REDUCTION AND IMPACT ON
SPEEDOMETER
Installation of a YETI Conversion kit on a
motorcycle affects its speed and the way the
speedometer (if present) should be read.
Depending on the bike model, the actual speed is
lowered by 35 to 40% as compared to the
motorcycle on wheels.
DIMENSION
GRADE
Nm
lb-ft
M6-1.0
8.8
10
7
M8-1.25
8.8
25
18
M8-1.25
10.9
33
24
M10-1.5
8.8
50
37
M10-1.5
10.9
70
52
M12-1.75
8.8
90
66
M12-1.75
10.9
125
92
WARNING
Over-tightening bolts may damage parts and
safety features may be affected.
