11
|
YETI SNOWMX USER MANUAL
BIKE MOUNT ADJUSTMENT
Before mounting the rear system to the bike, the
Bike mount must be extended out at its farthest
point. Proceed as follows:
• Loosen nut on eccentric bolt (
1
) and the Bike
mount M8 adjustment bolts (
2
).
• Using a 12mm socket, rotate eccentric bolt to
move the Bike mount out. See Figure 18.
Figure 18
SOFT STRUT PREPARATION
Before installing Soft Strut on your bike, the strut
components must be assembled as shown in
Figure 19. Proceed as follows:
Figure 19
• Assemble rod end (
1
) to strut body(
2
).
• Insert the flanged spacer bushing (
3
) in the Soft
Strut’s rod end.
• Set aside the 2 spacer bushings (
4
); they will be
installed later.
SOFT STRUT PRE-INSTALLATION
• Position the Soft Strut to the bike’s shock
absorber upper mount. See Figure 21.
IMPORTANT
: Flanged spacer bushing (
3
) must be
installed and positioned correctly in Soft Strut rod
end.
• Verify and adjust if needed the insertion direction
of the spacer bushing (
3
) to align the Soft Strut
(
2
) as straight as possible once the rear System
is installed. See Figure 20.
Figure 20
• Assemble Soft Strut (
1
) using the bike’s shock
absorber assembly bolt (
2
). See Figure 21
Figure 21
• Tighten
shock
assembly
bolt
(
2
)
to
manufacturer’s
recommended
torque
specification. Figure 21.
NOTE: Apply threadlocker product on bolt as per
manufacturer’s specifications.
