13
|
YETI SNOWMX USER MANUAL
Figure 26
• Loosen and remove bike mount bolt (
1
) to install
the Soft Strut in the Strut block (
2
). See Figure
27.
Figure 27
• Raise rear of YETI System and align the Soft
Strut lower mount point and Strut block in Bike
mount.
IMPORTANT
: Make sure Spacer bushings are
correctly positioned in Soft Strut lower mount point.
• Re-insert assembly bolt (
1
) to attach Soft Strut
(
2
) to Bike mount. Do not tighten the bolt
completely at this point. See Figure 28.
Figure 28
CHAIN INSTALLATION
Before installing the chain, the Bike mount should
be retracted as much as possible.
NOTE: For the next step, the bike should be raised
slightly so that the track is off the ground and
can be rotated.
• Insert chain (
1
) in upper opening at the front of
the system and feed it over jack shaft drive
sprocket (
2
). See Figure 29.
Figure 29
• Slowly rotate the YETI’s track to advance chain
links on the sprocket. Use a hook or magnet to
extract the chain out of the chassis through the
lower opening at the front. See Figure 30.
Figure 30
• Install the provided chain on the engine sprocket
and join the ends using the master link. See
Figure 31.
SHORT
LONG