YETI SNOWMX USER MANUAL
|
32
Nylon bushings - suspension
Verify play and extent of wear on the suspension’s
nylon bushings (
A
). If there is abnormal play in the
bushings, replace them. See Figure 62, Figure 63
and Figure 64.
NOTE: YETI 120SS or 129SS shown.
L
OWER
FRONT
ARM
NYLON
BUSHINGS
Figure 62
U
PPER
FRONT
ARM
NYLON
BUSHINGS
Figure 63
U
PPER
REAR
ARM
NYLON
BUSHINGS
Figure 64
Nylon Protectors - Front suspension arm
Verify extent of wear on Front Arm Nylon
Protectors. If the track’s inner drive lugs pass too
close to the shock upper mount, replace both
protectors. See Figure 65.
Figure 65
Rubber Dampers (suspension)
Verify general condition of rubber dampers installed
on the suspension rails. The dampers should be
replaced if they show cracks or are excessively
worn or deformed. See Figure 66.
Figure 66
Ski Skag
If the ski lacks support through turns on ice, check
condition of the skag (
A
). If the blades (
B
) show
deformations or are less than 4mm in height (8mm
when new), they do not provide enough support.
The skag should be replaced. See Figure 67.