33
|
YETI SNOWMX USER MANUAL
Figure 67
Side Runners
Verify the Side runners (
A
) mounted on the ski. If
they show rounded edges, they should be re-
sharpened. Replace part if the height of a runner is
under 19 mm (25mm when new). See Figure 68.
Figure 68
Rubber Damper (ski)
Inspect Rubber Damper mounted on ski. Replace
damper if it shows cracks or is excessively worn or
deformed. A deformed Rubber Damper does not
provide adequate support to the ski and affects the
bike’s steering behavior. See Figure 69.
Figure 69
CAUTION: Rubber damper must be correctly seated
in position. An improperly seated rubber damper
can result in ice accumulating underneath and
difficult steering.
Ball Joint - Soft Strut
Inspect ball joint on Soft Strut. Make sure that it is
not seized or too loose. Figure 70.
CAUTION: A damaged ball joint can make the System
difficult to adjust and result in damages if not
replaced.
Figure 70
Nylon bushings - Ski & Spindle assembly
Verify play and extent of wear on the nylon
bushings (
A
) guiding the assembly bolt that
secures the ski to the spindle. If there is abnormal
play in the bushings, replace them. See Figure 71.
Figure 71
